Sunday, March 20, 2011

Guest Tutorial: Skirt to Hat Refashion with "Just Between Friends"

I am super pumped about introducing you to Jonie from Just Between Friends! Go check out her blog--this girl has some great ideas!

First, I want to thank Erin for having me over today.  I have always enjoyed reading her blog!
My name is Jonie and I blog over at Just Between Friends.  I am really excited to show you a fun way to reuse those clothes you may have outgrown.

Here is my tutorial on 
how to turn a skirt into a hat!

*Disclaimer.  I fly by the seat of my pants a lot while crafting, so I don't have exact measurements, but I will show you how to find your own measurements the best that I can.*
All you need is:
An old skirt
sewing machine
seam ripper
pins
Pretty easy so far, right?
When I saw this skirt in Charli's throw away pile, I immediately saw the awesome fabric and then I noticed the waistband.  The waistband on her skirt is about 3 1/2 inches wide making it perfect to make a hat with.
I began by having my sister measure her head.  Then I unpicked the waistband on the skirt and then cut it to be the same as the measurement of her head plus a little extra for seam allowance.
The nice thing about using the waistband is that a lot of the work is already done for you.  To make it a stable hat, it needs to have at least two layers of fabric.  The waistband in this skirt had it already put together for me.  So, all I needed was to add a top a brim and embellish.
The next step is to cut out the top circle/oval part.  It should be a long circle, but not quite an oval.  I think I cut out two or three different sized circles from the lining of the skirt before I had it just right.  (I would suggest using a hat that you already have as a pattern to look off of for the top.  If you have a hat that fits you really well, add 1/4 of an inch all the way around for seam allowance when you trace it onto your fabric, and it should work great as a pattern.  After you cut the circle out of the lining, you will need to cut one out of the top layer of the skirt as well.  (It is easier to replace a lining fabric if you mess up)  Put the pieces together and pin it so that it looks like this.
Sew it up and turn it right side out.  It should then look like this.
From this point on, things get a little sketchy.  Making the actual hat part was no problem for me.  The brim was another matter entirely.  I stopped taking pictures at this point because of frustration.  I made three different brims on this hat but never felt like they fit just right.  Here is how I finally figured it out.  (In words, no pictures sorry)
I put the hat on and decided where I would want the brim to begin and end.  Then I traced an arc onto the skirt fabric using the hat as a guide for where it should go.  I cut out two arcs and then sewed them right sides together only around the arc part.  After that, flip it right sides out and top stitch the brim in two strips. (See picture below:
Then to attatch the brim to the hat, put the right side of the brim against the wrong side of the hat and top stitch. 
The waistband had two buttons and button holes which I thought would add a lot of character to the hat so when I cut out the hat I cut it so that the button holes were part of the hat and then sewed the buttons on top of the button holes.  I also used a little lace from the bottom of the skirt to finish it off.
I really like the way it looks, and the good news is.....It fits Charli's head!  YAY!  Here she is wearing it. 
Charli told me that she really loves it and that is good enough for me! 
Now it's your turn.  Go find that skirt that doesn't fit anymore and make it into something that you will wear and love!  I would love to see what you come up with if you do make one. 

featured button
signature

3 comments:

Note: Only a member of this blog may post a comment.